Old Maytag range would no longer bake. Oven gradually stopped heating. Part was easy to install (watched youtube). The oven temperature corrected. Cancelled the replacement Oven order which was delayed anyway. Happy we decided to do the repair ourselves.

The item was perfect. I have an Amana AGR5330BAS3. The original part had a 2 prong conector. I just cut the conector and attached it to the new part. It worked perfectly.I could've just remove the conector from the other wires and just connect the wires directly but I liked the conector.It shipped fast and it worked perfectly.

I was a bit concerned with the FakeSpot review "F", however, I'm always interested in supporting the small business so I took a chance. The igniter arrived fast (2 day shipping) was easy to install on my BlueStar oven and fired right up in 30 seconds. Nice blue flame. I just installed so I can't comment on the longevity, only time will tell. The original OEM lasted 3 years, so this one should outlast the 1 year warranty.

Not much to say here, my old igniter died slowly and I replaced it. Sadly, the first replacement (different brand) was DOA which made me think there was something else wrong. Nope, just a bad one I guess. Whatever, new one works a treat. There is no connector on this, just bare wire ends and ceramic wire nuts, but that's fine. I cut the pigtail off of the original and use the wire nuts to connect it up. Word of caution, I'd cut the tags off the wires before you install it. I left one on and it took a while before it burned off and stunk quite a lot until it did. Seems like a dumb idea to attach a flammable tag to a thing that makes fire for a living.

Better price than GE and fit just fine as a replacement. Oven died four days before Thanksgiving and this got here in time to do the repair.

Was exactly what we needed for my stove and super easy to replace

This was a quick fix once I actually got it in the mail. The only complaint I have was my expected shipping date changed 3 times and ended up being about a week later than expected once it did actually arrive. Life was tough without my oven for that long but once it did arrive it worked great and was an easy fix.

We bought this part because the first part that was sent to us was broken when it arrived. We just Installed this one today and it immediately sparked. We’ve gotten 2 faulty pieces from this manufacturer. Do not buy!

Was able to easily install.

My old furnace turning off and on for every 2 or 10 minutes. Order this parts and works like charm.It took 2 hrs for me due to rusty bolts and tight space of my old furnace.

I have bought from two different vendors. This company seems to know what they are doing. Product came on time. Product came in a box to prevent shipping damage and no missing parts. Got it installed, fired the first time. To honest don't know how long it lasts. The last vendor I bought from lasted roughly five months. This one seems to have more quality. Hopefully it will last for years.Nevermind, it last two hours.

This Gas Furnace Pilot Light and Safety Ignition Switch perfectly replaces the damaged one in my furnace.I had the unfortunate experience of hiring a "Professional" HVAC service company to come out and do a "tune-up" on my furnace / AC system.The service tech told me that my newer condensate pump needed replacing.It doesn't, you'd be surprised what a bleach and water solution will clean out of your condensate pump and drain line.While cleaning my electronic filter, he broke 3 of its wires.About 2 weeks later the furnace stopped working altogether.They tuned it up alright!So, as usual, I had to do my own repairs.I found that the furnace was cycling due to the ignition safety switch.The flame sensor part of it I think.Pretty sure "tune-up" boy damaged it while cleaning that part too.I took the pilot light / safety switch out and tried to give it a complete cleaning, thinking "tune-up" boy's in place cleaning simple disturbed debris and that was causing it to fail.Unfortunately that didn't fix the problem and a replacement was necessary.So I ordered this Pilot Light / Safety Switch Assembly and Pilot Burner Electrode.Got it installed and success, we have a working furnace, no thanks to the professionals.If it helps anyone else, the symptom was that the furnace would initiate start up when calling for heat.The gas valve opened and the igniter would light the burners.After 10 - 20 seconds it would all turn off.Usually this is caused by the flame sensor not sensing the flame / heat and for safety, shuts the gas valve off.It would do this over and over again, about every two minutes or so while heat was in demand.Watch YouTube videos and learn to do this repair yourself.Many of these so called "professionals" are just salesmen in disguise, they will ALWAYS tell you the sky is falling / your furnace is about to explode.Educate yourself, be aware, be safe and save money.

The safety ignition switch is really high quality with flame resistant coating on the wires. A majority of these kits only come with the safety ignition switch, but this kit also comes with the pilot igniter. Held together side by side I could not tell the difference between the original parts and the replacement parts, except that the igniter has a beefier ceramic block.

A great value for a great item. This is one of the most common failures that an A/C unit can have, and of course when they fail it's going to be blazing hot outside and all the local suppliers are closed for the day or weekend. The ability to get this same day or next day is great, but I actually prefer to keep one on hand. I am a bit of a boy scout in the aspect of liking to keep a few spare parts for the home appliances around, after a few failures over the years, I've determined that off something is going to break, it will be when everything is closed, or the one thing you need isn't in stock.The motor is good quality and universal so it will fit most all units. The wiring is just like any other universal, allowing you to change voltage and rotation via the jumpers. The shaft is nice and long so it will likely fit the deepest mounts, and they are designed to be cut off after install.Motor starts quietly and quickly, runs smooth and cool.

I recently had to replace the fan motor on my GE heat pump, and this motor was a perfect fit.Installation was a breeze, and I was able to swap it out in no time. The new motor's wire colors matched perfectly with the old one. Since I installed the new motor, my heat pump has been running like a champ.

When my ac started acting up I thought I was going to have to drop a few grand buying another unit but I had my buddy that works on ac units for a living take a look at it and all I needed was this motor. It was simple for him to install but if you don’t know about these things leave it to a professional as you can do dame if wired up wrong. Now I’m cool as a cucumber, I hope it lasts me for years to come!

Worked perfectly as a replacement. Runs cool, quiet and efficient.This one's got a slightly longer shaft (a few mm) than the old one, which didn't matter, it's still got plenty of clearance to the shroud.

Rpm 1100, just what i need.Volage upto 230, good. U5 uf, for capacitor, perfect!Hp is weird, it says 1/12.The one im using has hp 1/4,1/5With that said, this fan will has to draw more power. It will still work.In my opinion, The capacitor will work harder since it needs more crank start/power.To start the fan.Its a little bit thing. Nothing to worry, im just being to technical in numbers.

Good value, works great. Good quality materials. I would buy again.

Replaced my old condenser fan motor for my AC and it has worked well so far, I am not sure about its durability as I have just replaced it. If there are any problems in use, I will update my reviewed.